Olympia Chimney Fireplace Services in Orlando: What to Know First
Olympia Chimney fireplace services in Orlando typically run $180-$890 depending on whether you need a gas valve adjustment, firebox reline, or full insert swap, and most jobs we can schedule within 24-48 hours. We’re an independent Olympia Chimney service provider, not a factory-authorized dealer, which means we source parts based on what your unit actually needs rather than what a distributor wants to move. If you own an Olympia Chimney gas fireplace, wood-burning unit, or insert in College Park, Winter Park, Baldwin Park, or anywhere in Orange County, we handle the diagnostics, the repair, and the cleanup in one visit. Call (877) 565-7563 and a live person will answer, day or night.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia 3000 Series gas inserts - pilot light won’t stay lit after heavy rain. Orlando’s afternoon thunderstorms drive water down the vent termination, and the 3000’s original pilot assembly sits low enough to flood. We see this in Baldwin Park homes with roof-penetrating terminations. Our fix: pull the assembly, dry the orifice with compressed air, and swap in a sealed-design replacement that sits 3/4-inch higher. Takes about 90 minutes.
- Olympia Tradition wood-burning fireplaces - cracked refractory panels behind the firebox. Central Florida’s humidity swings cause the steel wrapper to expand and contract more than the refractory can tolerate. The crack starts hairline, then widens after a few hot fires. We replace with HeatShield refractory-grade panels rated to 2,200°F, or full panel replacement if the steel wrapper has warped. We photograph the damage before we touch anything.
- Olympia Vent-Free gas logs - sulfur odor and sooting on the mantle. These units run tight in Orlando’s already-humid air, and the Vent-Free line’s oxygen depletion sensor can drift out of spec after 6-8 years. The logs look fine; the combustion doesn’t. We clean the burner ports, recalibrate the ODS with a manometer, and check room air exchange. If the unit’s past its service life, we’ll tell you straight.
- Olympia Chimney flexible liners - separation at the collar joint in two-story homes. The collar on early Olympia flex liners used a single-rivet design that fatigues where attic temperatures spike. In Winter Park colonials with steep roof pitches, we’ve found collars separated by two inches. We replace with DuraFlex Pro or Gelco UltraPro collars, double-riveted and lock-seamed, and we support the liner at the thimble so it doesn’t happen again.
- Olympia direct-vent fireplaces - failed blower motor or noisy bearings. The OEM blower on Olympia direct-vent units is a tangential design that collects dust from Orlando’s pollen seasons. By year seven or eight, it hums, then seizes. We stock aftermarket blowers with sealed ball bearings and higher CFM ratings that bolt right in, or we can source the factory part if you prefer. Either way, we test airflow at the grille before we leave.
Our Olympia Chimney Fireplace Services Process
- 1
Call and schedule. A live person answers, asks what you’re seeing or hearing, and books a window. Most Olympia Chimney jobs in Orlando we can get to next-day.
- 2
Level-2 camera inspection. Our tech arrives uniformed and background-checked, lays down runners, and runs a chimney camera. You see the footage on a tablet. We explain what we found in plain English, with photos attached to your estimate.
- 3
Parts decision. If your Olympia unit needs a component, we show you OEM versus quality aftermarket options - DuraFlex for liners, HeatShield for refractory, Gelco for caps - with prices for each. No pressure either direction.
- 4
The repair. Most Olympia Chimney fireplace services we complete in a single visit because our trucks carry common parts. Gas valve, blower, refractory panel, damper assembly - if it’s on the van, we fix it then.
- 5
Test and document. We fire the unit, check draft with a manometer, verify CO levels at the fireplace face, and photograph the finished work. You get a report with images and the 90-Day Done Right Promise in writing.
- 6
Cleanup and close. We haul away old parts, vacuum the hearth, and leave the work area cleaner than we found it. The invoice matches the estimate. No arguing, no paperwork chase.
What Olympia Chimney Fireplace Services Costs in Orlando
These are real numbers for Orlando-area Olympia Chimney work, based on what we’ve billed in the last 18 months:
- Gas fireplace tune-up and safety check: $89 (our seasonal special)
- Pilot assembly replacement, Olympia 3000 Series: $180-$260
- Blower motor replacement, direct-vent models: $340-$480 (OEM) or $260-$380 (quality aftermarket)
- Refractory panel replacement, Tradition series: $420-$650 depending on panel count and steel wrapper condition
- Fireplace insert removal and replacement: $720-$890 including new surround and collar adaptation
- Damper repair or replacement: $280-$440
What moves the price: accessibility (steep roof, tight chase), whether we need to order a factory-only part versus pulling from stock, and if we find secondary damage during inspection - a rusted firebox floor, for example, behind the cracked panel. We price it upfront. The number on the estimate is the number on the invoice. Call (877) 565-7563 for a free estimate with no obligation.
Why Orlando Homeowners Call Hearthstone Chimney Co. of Orlando for Olympia Chimney Work
We’ve been answering the phone with a live person for over 42 years, and we plan to be here in thirty more. That changes how you treat a customer. Our 90-Day Done Right Promise - in writing, no arguing - means if an Olympia Chimney repair isn’t right, we come back. Our techs know the difference between a 3000 Series and a Tradition unit before they open the truck, and they carry DuraFlex, HeatShield, and Gelco materials so we’re not waiting on a parts run. Roy Dempsey grew up in College Park working on chimneys older than he was, and he built this company on the idea that a straight answer is the best advertisement. A clean chimney is not a luxury - it is just the job done right.
FAQs
No, using an independent service provider does not automatically void your warranty, though factory-authorized dealers sometimes imply otherwise. The Magnuson-Moss Warranty Act prohibits manufacturers from voiding a warranty solely because you chose an independent technician. We document every repair with photos and parts receipts, and if a warranty claim arises, you have the paperwork. For questions about your specific Olympia Chimney warranty status, call us at (877) 565-7563.
Most common parts we stock on our trucks; if we need to order factory-specific components, lead time is typically 3-5 business days. For discontinued Olympia Chimney lines, we often source quality aftermarket equivalents from DuraFlex, HeatShield, or Gelco that meet or exceed original specs. We’ll tell you before we order which route we’re taking and why.
Repair is usually cheaper if the firebox and venting are sound. A gas valve or blower replacement runs under $500; a new insert with installation starts around $2,400. We inspect first, show you the camera footage, and give you both numbers. If the unit is past 15 years and the heat exchanger is cracked, we’ll recommend replacement. Call (877) 565-7563 for a free estimate - we’ll give you the honest math.
We often can for no-heat or gas-leak calls, especially in Winter Park and College Park where our techs are already routing. Standard appointments usually book within 24-48 hours. A live person answers the phone 24 hours a day, 7 days a week, so you never leave a message and hope.
Yes. We service and install using professional-grade materials from DuraFlex, HeatShield, Gelco, Famco, and Copperfield, and we work on most major fireplace brands found in Orlando homes. Our trucks carry multi-brand parts so we’re not making two trips.
Written by Roy Dempsey, Owner & Master Sweep, Hearthstone Chimney Co. of Orlando at Hearthstone Chimney Co. of Orlando, serving Orlando and nearby areas.