Gelco Chimney Cap & Crown in Orlando: What to Know First
As an independent Gelco service provider, we repair and replace Gelco chimney caps and crowns across Orlando, typically completing the job in a single visit with upfront pricing that matches the final bill. Most Gelco cap and crown calls in Orlando run $280-$780 depending on whether we’re coating a hairline crack or fitting a new multi-flue cap after storm damage. Roy Dempsey and our team have worked on Gelco products in Orlando homes for over 42 years, and we know which series hold up to Central Florida’s driving rain and which ones need attention before the next hurricane season. Call (877) 565-7563 for a free estimate.
This page is for Orlando homeowners who already have a Gelco cap or crown and need honest answers about what’s wrong, what it costs, and who can fix it without upselling what you don’t need.
How Gelco Products Fail - and How We Fix Them
- Gelco Multi-Flue Caps with 304 stainless mesh - The 304-grade mesh on older Gelco multi-flue units corrodes faster than the 316-grade upgrade in Orlando’s salt-laden afternoon thunderstorms, especially in homes east of Semoran Boulevard where the breeze carries coastal moisture inland. We replace with 316-grade mesh or full 316 caps that outlast the original by a decade.
- Gelco Single-Flue Caps with factory-sealed seams - The factory sealant bead along the skirt edge hardens and cracks after seven to ten years of Central Florida UV exposure, letting water run down the flue tile. We strip the old sealant, re-bed the cap with high-temp silicone rated for 400°F continuous, and torque the attachment screws to spec so the cap stays put in 60-mph gusts.
- Gelco Draft King caps with built-in dampers - The damper linkage seizes from creosote glazing in Orlando’s mild winters, where homeowners run short, hot fires rather than all-day burns. We disassemble the linkage, clean and re-lubricate with graphite, or replace the damper assembly if the pivot pin has corroded through.
- Gelco chimney crowns with factory trowel finish - Gelco’s standard crown coating is workable for five to seven years, but Orlando’s thermal cycling, hard afternoon downpours, and occasional freeze-thaw in January open hairline cracks that become spalling within two seasons. We grind out cracks, apply CrownCoat or a poured concrete crown with expansion joints, and slope it 2:12 so water sheds fast.
- Gelco wind-directional caps in lakefront homes - The rotating hood bearing seizes with pollen and oak catkin debris common in Orlando’s March through May season, locking the cap in one position and defeating its purpose. We clean the bearing race, replace with a sealed stainless bearing, and show you how to check it once a year.
Our Gelco Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers, 24/7. We ask for your cap or crown symptoms, the approximate age if you know it, and whether you’ve noticed leaks after storms.
- 2
Level-2 camera inspection on arrival. Our technician photographs the cap, crown, and flue interior. You see the images on a tablet while we explain what’s failed and why.
- 3
Parts decision. We stock common Gelco caps and crown repair materials. If your model is discontinued, we source quality aftermarket that fits Gelco flue dimensions without voiding any remaining warranty, or we order OEM if that’s your preference.
- 4
The repair. Background-checked, uniformed technicians complete most Gelco cap and crown jobs in one visit. We match Gelco’s stainless specs or upgrade to 316-grade when the location demands it.
- 5
Test and document. We run a water test on crowns, verify cap attachment torque, and give you photos of the completed work with a plain-English summary.
- 6
The 90-Day Done Right Promise. In writing, no arguing. If it’s not right, we come back. That’s the Keystone Standard we’ve kept since 1984.
What Gelco Chimney Cap & Crown Costs in Orlando
| Service | Typical Range |
|---|---|
| Gelco cap reseal and re-attachment | $280-$420 |
| Gelco single-flue cap replacement (standard) | $340-$580 |
| Gelco multi-flue cap replacement | $520-$780 |
| Gelco crown crack repair with coating | $380-$620 |
| Gelco crown rebuild (poured concrete) | $1,200-$2,400 |
What moves the price: accessibility (steep roof pitch, two-story stack), whether the flue tile needs repair before capping, and whether we’re matching discontinued Gelco dimensions with custom fabrication. We give you the full number before we start. Call (877) 565-7563 for your free estimate.
Why Orlando Homeowners Call Hearthstone Chimney Co. of Orlando for Gelco Work
We’ve been answering the phone with a live person for over 42 years, and we plan to be here in thirty more. That changes how you treat a customer.
Our 90-Day Done Right Promise means if the crown coating cracks or the cap seal fails, we come back. In writing, no arguing. Our technicians carry Gelco-compatible inventory and know the difference between a Series 8 and Series 9 cap without looking it up. When a Gelco part is back-ordered, we have DuraFlex and HeatShield alternatives that meet the same specs, so you’re not waiting three weeks for a rainstorm to do more damage.
Roy Dempsey grew up in College Park working on his grandfather’s chimney, and he’s spent two decades on Orlando roofs before founding Hearthstone. He’ll tell you when a Gelco cap just needs cleaning and when it needs replacement, and he does not confuse the two. A clean chimney is not a luxury - it is just the job done right.
FAQs
No. As an independent Gelco service provider, we use OEM-spec or equivalent parts and document our work so any remaining manufacturer coverage stays intact. We note serial numbers and installation dates on your invoice for your records. Call (877) 565-7563 if you need warranty documentation.
Most Gelco cap replacements happen same-day or next-day because we stock common sizes. Custom or discontinued models take two to five business days to source. We answer live 24/7, so call (877) 565-7563 and we’ll tell you exactly what’s on the truck today.
Coating a Gelco crown with hairline cracking runs $380-$620 and buys five to seven years in Orlando’s climate. A full rebuild at $1,200-$2,400 lasts decades. We recommend coating when the concrete base is sound and rebuilding when spalling exceeds half an inch deep or rebar is exposed. We’ll show you the camera footage and give you both numbers so you decide.
Yes. We maintain a cross-reference library of discontinued Gelco dimensions and work with fabricators who can match flue openings within a sixteenth of an inch. When OEM is truly gone, we use quality aftermarket from Famco or Copperfield that meets Gelco’s original stainless and mesh specs.
Yes. We honor a permanent 5% Senior and Veteran discount on all chimney services, including Gelco cap and crown repair and replacement. We also offer $50 off any repair over $250. Ask when you call (877) 565-7563 for your free estimate.
Ready to get your Gelco chimney cap or crown sorted? Call Hearthstone Chimney Co. of Orlando at (877) 565-7563. A live person will answer, day or night, and we’ll schedule your free estimate at a time that works. Most jobs finish in a single visit, with the price fixed before we start and our 90-Day Done Right Promise backing every bolt and bead.
Written by Roy Dempsey, Owner & Master Sweep, Hearthstone Chimney Co. of Orlando at Hearthstone Chimney Co. of Orlando, serving Orlando and nearby areas.