Gelco Fireplace Services in Orlando: What to Know First
We provide independent Gelco fireplace services throughout Orlando, from College Park to Winter Park to Doctor Phillips, with most repairs completed in a single visit and upfront pricing before any work begins. A typical Gelco service call runs $180-$450 depending on the component, and we carry common Gelco parts on our trucks so you’re not waiting on shipping. This page is for homeowners who know they own a Gelco fireplace, insert, or damper assembly and want a technician who understands the difference between a Series 500 firebox crack and a Series 800 venting issue. Call (877) 565-7563 and a live person will answer, 24 hours a day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Gelco Products Fail - and How We Fix Them
- Series 500 prefab firebox refractory panel cracking. The refractory panels in Gelco’s Series 500 wood-burning fireplaces are prone to hairline cracking after 8-12 years of Orlando’s thermal cycling, hot winters followed by humid, stagnant summers. We replace with Gelco-spec refractory or HeatShield cerfractory foam for a permanent bond, never generic cement board that voids the unit’s UL listing.
- Series 800 direct-vent gas fireplace failed ignition. The SIT 820 valve and ceramic electrode combination in Series 800 units collects Central Florida’s fine limestone dust, causing intermittent ignition that many techs misdiagnose as a bad gas valve. We clean the pilot assembly, test microamp draw, and replace only the electrode if the valve tests within spec, saving you the cost of an unnecessary valve swap.
- Gelco throat damper corrosion and stuck operation. Older Gelco throat dampers, common in 1980s Orlando ranch homes, seize from rust and creosote buildup in our high-humidity climate. We free the mechanism, assess the frame for rot, and install a Gelco-compatible top-sealing damper or a Lock-Top model when the throat frame is too far gone.
- Fireplace insert venting blockages in vented gas units. Gelco inserts installed in original masonry fireplaces often use co-linear flex runs that sag or collect debris in Orlando’s flat-roof bungalow neighborhoods. We run a Level-2 camera inspection to locate the restriction, then re-terminate or replace with DuraFlex or Olympia Chimney liner sized to the insert’s exact BTU rating.
- Gelco chimney cap and chase cover rust-through. The original galvanized caps on Gelco factory-built chimneys rust from the inside out in Orlando’s afternoon thunderstorms. We measure on-site and fabricate a replacement from Gelco-compatible Copperfield stainless or copper stock, sealed with proper storm collar overlap, not caulked-over rust.
Our Gelco Fireplace Services Process
- 1
Call and schedule. A live person answers, asks the model number if you have it, and books a window. We confirm by text.
- 2
Arrival and protection. Our technician arrives in uniform, lays down floor protection, and conducts a visual and operational assessment of the Gelco unit.
- 3
Level-2 camera inspection. For suspected firebox, flue, or venting issues, we run a camera and show you the footage. You get photos and a plain-English verdict.
- 4
Parts decision. We stock common Gelco igniters, electrodes, refractory panels, and damper hardware. For obsolete parts, we source quality aftermarket or cross-reference to HeatShield or DuraFlex equivalents that maintain safety ratings.
- 5
Repair and test. We complete the work, test all functions, check gas pressure and draft, and clean the work area. The invoice matches the upfront estimate.
- 6
Documentation and guarantee. You receive written documentation of the inspection and our 90-Day Done Right Promise. If it’s not right, we come back. In writing, no arguing.
What Gelco Fireplace Services Costs in Orlando
| Service | Typical Range |
|---|---|
| Gelco gas fireplace tune-up and safety check | $180-$250 |
| Igniter, electrode, or thermocouple replacement | $220-$340 |
| Refractory panel replacement (Series 500) | $380-$650 |
| Throat damper repair or top-sealing damper install | $450-$780 |
| Fireplace insert reline with DuraFlex or Olympia Chimney | $1,800-$3,200 |
| Chimney cap or chase cover replacement | $320-$580 |
What moves the price: accessibility of the unit, whether the firebox requires full panel replacement versus localized HeatShield repair, and whether the venting run needs partial or full relining. We do not start work without a signed estimate. Call (877) 565-7563 for an exact quote, estimates are free.
Why Orlando Homeowners Call Hearthstone Chimney Co. of Orlando for Gelco Work
We’ve worked on Gelco units in Orlando since the brand was common in new construction here in the 1980s and 1990s. Roy Dempsey, our owner, knows which builder subdivisions got which Gelco series, and our technicians carry the specific parts those units need. When a Gelco part is obsolete, we don’t improvise. We cross-reference to professional-grade equivalents from HeatShield, DuraFlex, or Olympia Chimney that maintain the unit’s safety certification. Our 90-Day Done Right Promise covers every repair in writing. A live person answers the phone at any hour. Most jobs finish in one visit. That’s a square deal, no surprises on the bill.
FAQs
No. Gelco’s factory warranty on materials expired years ago for most Orlando installations, and as an independent Gelco service provider, our repairs do not affect any remaining component warranties from part manufacturers. We document every repair with photos and part numbers so warranty claims on new components remain valid. Call (877) 565-7563 if you have paperwork you’d like us to review.
Yes, for most models. We stock common Gelco igniters, electrodes, and refractory panels, and we source discontinued parts through our network of suppliers or fabricate compatible solutions from HeatShield and Copperfield materials. For units where no safe repair path exists, we give you a straight answer and a replacement option. Call (877) 565-7563 to check availability for your model.
Repair is almost always less expensive if the firebox and venting are structurally sound. A typical Gelco repair runs $220-$650, while a quality replacement fireplace installed properly starts around $3,500 in the Orlando market. We inspect first and tell you honestly which side of that line you’re on. Call (877) 565-7563 for a free assessment.
We schedule most Gelco service calls within 24-48 hours, and we keep emergency slots for no-heat situations, especially during Orlando’s cold snaps in January and February. A live person answers the phone 24 hours a day to book your appointment. Call (877) 565-7563 now.
Yes. We work with DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield products daily, and we service all major fireplace manufacturers. Our technicians carry multi-brand diagnostic tools and parts, so we’re not guessing when your unit has mixed components from a previous repair. Call (877) 565-7563 for any fireplace service need.
A clean chimney is not a luxury - it is just the job done right. If your Gelco fireplace needs attention, call Hearthstone Chimney Co. of Orlando at (877) 565-7563. A live person will answer, we’ll schedule a time that works, and you’ll get upfront pricing before any work begins. We’ve served Orlando and nearby communities for over 42 years, and we plan to be here when you need us next.
Written by Roy Dempsey, Owner & Master Sweep, Hearthstone Chimney Co. of Orlando at Hearthstone Chimney Co. of Orlando, serving Orlando and nearby areas.