HeatShield Chimney Cleaning & Sweep in Orlando, FL

HeatShield Chimney Cleaning & Sweep in Orlando: What to Know First

We provide independent HeatShield chimney cleaning and sweep services throughout Orlando, with most appointments scheduled within 48 hours and completed in a single visit. A standard HeatShield system cleaning and Level 1 inspection runs $189-$279, and we tell you the exact number before we start. As an independent HeatShield service provider, we are not affiliated with or authorized by the manufacturer, which means our recommendations are based on what your chimney actually needs, not what a warranty department prefers.

Call (877) 565-7563

This page is for Orlando homeowners who installed a HeatShield liner, coating, or repair system in the last 5-15 years and need it cleaned, inspected, or maintained by technicians who understand how these products age in Central Florida’s climate. If that is your situation, call (877) 565-7563 and a live person will answer, any hour of any day.

How HeatShield Products Fail - and How We Fix Them

• Cerfractory Foam Joint Repair degradation in high-heat gas applications. The Cerfractory Foam system is excellent for sealing flue gaps, but in Orlando we see premature surface chalking when it is paired with high-efficiency gas inserts that cycle on and off frequently. The thermal shock loosens surface particles that mix with soot and restrict draft. We remove the degraded material with rotary whipping, reapply factory-matched Cerfractory Foam only where the substrate is sound, and document the repair with camera footage you can see.
• HeatShield Flue Liner shrinkage at termination points. The poured liner system can pull back slightly from the flue collar after 8-12 years of summer humidity cycles followed by winter heating. This creates a gap that collects creosote and becomes a fire path. Our Level 2 inspection catches this with a camera before it is visible from below. We re-establish the seal with manufacturer-compatible refractory material, not generic furnace cement that cracks in the first season.
• Smoke Chamber Parge coating delamination from moisture intrusion. Orlando’s afternoon thunderstorms drive water into chimneys with marginal crowns. When the Smoke Chamber Parge coating absorbs that moisture and then dries rapidly in 95-degree heat, the surface spalls in thin flakes. We remove the loose material, address the water entry point first, then re-apply only after the substrate is properly dried. Skipping the drying step is why some parge repairs fail twice.
• Resurfacing Liner pinholing from creosote acid attack. The Resurfacing Liner is a cost-effective alternative to full relining, but it is thinner than poured systems and more vulnerable to prolonged creosote contact. In Orlando, where many homeowners burn oak and citrus wood from local tree services, the acidic residue is harder on refractory surfaces than the pine common up north. We adjust our cleaning frequency recommendations based on your actual fuel source, not a national average.
• Thermal expansion mismatch at factory transitions. HeatShield’s factory-made transition pieces between liner sections can work slightly loose where dissimilar materials meet. The gap is usually small, 1/8 inch or less, but it is enough to snag cleaning brushes and create a creosote trap. We spot these with camera inspection before running mechanical cleaning heads, then re-bed the joint with appropriate refractory if movement is confirmed.

Our HeatShield Chimney Cleaning & Sweep Process

1. 1
   Call intake with live person. We ask what HeatShield product you have, when it was installed, and what you are burning. This determines whether we send a technician with poured-liner or coating-specific tools.
2. 2
   Level 1 or Level 2 inspection on arrival. We photograph the flue interior, the smoke chamber, and the termination. You see the images on a tablet while we explain what we found in plain English.
3. 3
   Parts decision: OEM HeatShield material versus quality aftermarket. For warranty-active systems under 10 years, we use factory Cerfractory Foam or specified refractory. For older systems, we may recommend compatible professional-grade materials from Olympia Chimney or Copperfield that perform as well at lower cost. We explain the trade-off and you decide.
4. 4
   Cleaning and repair with HeatShield-appropriate tools. Rotary systems sized to your flue diameter, polymer whips for coated surfaces that metal brushes would scar, and HEPA containment so your living room stays clean.
5. 5
   Post-work camera verification and draft test. We run the camera again to confirm the repair, then measure draft pressure to verify the system draws correctly under operating conditions.
6. 6
   Written documentation and 90-Day Done Right Promise. You receive photos, a plain-English verdict, and our guarantee in writing. If it is not right, we come back. No arguing, no paperwork chase.

What HeatShield Chimney Cleaning & Sweep Costs in Orlando

These are Orlando market ranges for 2024-2025. Your exact estimate comes after we see the system. Estimates are free, and the number we quote is the number on the invoice. Call (877) 565-7563 for yours.

Why Orlando Homeowners Call Hearthstone Chimney Co. of Orlando for HeatShield Work

We have been working chimneys in Orlando since 2014. Roy Dempsey, our owner, spent two decades on ladders across Central Florida before founding this company, and he built it on the premise that a straight answer is the best advertisement. Our technicians are background-checked, uniformed, and trained on HeatShield’s specific product lines, not just generic liner systems. When a HeatShield part is back-ordered or discontinued, we have working knowledge of compatible professional-grade alternatives from DuraFlex and Gelco, so you are not held hostage by a single supplier.

Every job carries the 90-Day Done Right Promise in writing. Our phones are answered by a live person 24 hours a day. Most jobs finish in one visit. A clean chimney is not a luxury - it is just the job done right.

FAQs